Author Archives: admin

Oris Aquis Depth Gauge

Oris, long known for its professional-grade divers’ waterproof replica watches sale, achieved a watch-world milestone with its Oris Aquis Depth Gauge, introduced in 2013. It is the first divers’ watch that measures depth by allowing water to enter the timepiece — a feature that would normally be a serious divers’ watch no-no.

The patented system in the Aquis Depth Gauge uses the principle of the Boyle Mariotte law — named for the two scientists who discovered it — which states that if the volume of a gas is decreased, the pressure increases proportionally. How the system works is thus: the watch’s sapphire crystal, which is a full 50 percent thicker than an average one, has a channel milled into its side that runs counterclockwise to the dial and stops between 1 and 2 o’clock. A small hole at 12 o’clock leads to the channel, while a rubber gasket seals the join between crystal and case.

As the diver descends wearing the watch, the surrounding water pressure compresses the air inside the channel and allows water to seep in through the inlet at 12 o’clock. The edge of the channel changes from light gray to dark gray to differentiate between water and compressed air, indicating the depth, in meters, on a yellow scale printed on the inside of the crystal as the diver descends or ascends. Unlike other watches with depth gauges, there is no inertia in the system, which means no delay in displaying the actual, accurate depth indication.

Oris Aquis Depth Gauge - front

Oris Aquis Depth gauge case diagram

Oris Aquis Depth Gauge Dial CU

Other features that make the Oris Aquis Depth Gauge suitable for professional diving are its stainless steel case, which is water-resistant to 500 meters and has an engraved meters-to-feet conversion scale on the screw-down caseback so international diving enthusiasts can make quick calculations; its unidirectional rotating bezel, with minute scales on a black ceramic inlay; and the easily adjustable folding clasp, which also has an “anchor” safety feature that prevents the watch from falling off the wrist.

The movement is the automatic Oris Caliber 733, based on an SW 200, which powers the central hours, minutes and seconds and the date display at 6 o’clock. The dial’s indices and hands are coated with white Super-LumiNova, which, Oris says, offers excellent underwater legibility. The case’s screw-down security crown is embedded into and protected by a stainless steel safety barrier.

The high quality replica watch, which comes on a rubber strap, is packaged in a special waterproof case with several useful accessories: a replacement metal bracelet, a set of tools to change the straps; a certificate with details on the Aquis Depth Gauge’s technology, and a specially configured cleaning device for the sapphire crystal.

Black-on-Black Swiss Replica Watches Online

Blue-on-blue isn’t the only popular watch-color trend of recent years. “All-black” cheap replica watches online, with ebony-colored cases, dials, and straps, have also remained popular. Nearly every watch brand, from mass-market and inexpensive to pricey and high-end, now makes at least one black-on-black model. Here are 5 watches that are clad in black from head to toe.

Introduced at the 2013 SIHH watch fair, Audemars Piguet’s Royal Oak Offshore Diver joined the Royal Oak Offshore Grand Complication and Royal Oak Offshore Chronograph as part of the brand’s celebration of 20 years of its Royal Oak Offshore watch. The new Diver is the third such model to be introduced, and the first to be offered in a ceramic case. The case, which is water-resistant to 300 meters, also includes a bezel and easy-grip crowns made of deep-black, high-tech ceramic — a material that is approximately seven times harder than steel and extremely scratch-resistant. The Audemars Piguet Royal Oak Offshore Diver retails for $21,800.

Audemars Piguet Royal Oak Offshore Diver

Inspired by a vintage divers’ waterproof replica watch sale from the 1950s, the Blancpain Fifty Fathoms Bathyscaphe Flyback Chronograph ($17,000), contains an all-new Blancpain manufacture movement, which features automatic winding, a column-wheel chronograph mechanism with vertical clutch, and a superfast frequency of 36,000 vph (5 Hz). The 43-mm case is made of brushed black ceramic and the black dial has a sunburst finish.

Blancpain Fifty Fathoms Bathyscaphe Flyback Chrono - angle

The case of the Breitling Navitimer Cosmonaute Blacksteel, 43 mm in diameter and water-resistant to 30 meters, was blackened using the same process as the Avenger Seawolf Blacksteel model, in which a highly-resistant carbon-based coating is added to the steel. The dial echoes the case’s black color, while white, luminescent-coated numerals and hands, and small red hands for the chronograph counters, provide contrast. The Breitling Navitimer Cosmonaute Blacksteel comes on a perforated black rubber “Ocean Racer” strap. A limited edition of 1,000 pieces, it retails for $9,590.

Breitling Navitimer Cosmonaute Blacksteel

At Baselworld 2013, Eberhard announced a limited edition Chrono 4 Géant watch, nicknamed “Full Injection.” The watch gets its name — and its sleek, dark, “stealth” look — from the special treatment used to harden the 46-mm steel case. The process, an advanced low-temperature carbon diffusion, allows the “injected” carbon to penetrate the steel for 30 micrometers to produce a structural hardening. The black coloring comes from the use of a DLC treatment called Dianoir, which is used on the case, bezel, crown, chronograph push-buttons, and buckle. The dial is also black, with black chronograph subdials. The Chrono 4 Géant Full Injection will be produced in a limited series of 500 pieces.

Eberhard & Co. Chrono 4 Géant Full Injection

Girard-Perregaux recently introduced a new version of its re-branded Traveller WW.TC (World Wide Time Control) high quality replica watch in black DLC-coated titanium. The new version of this user-friendly world-time watch is lighter, because of the titanium case, and very durable and scratch-resistant due to the DLC (Diamond-Like Carbon) coating. The center of the dial features a three-dimensional representation of the latitudes and longitudes covering the globe, and also includes the displays for the watch’s chronograph function, in a tri-compax layout (subdials at 3, 6, and 9 o’clock); the date, which is placed between 1 and 2 o’clock; and the brand’s name and logo.

Girard-Perregaux Traveller WW.TC Titanium DLC - angle

Gold Patek Philippe Nautilus

Some of you may know that I have a weak spot for best quality replica watches designed by Gérald Genta in the 1970s, a list that includes the Royal Oak by Audemars Piguet and the Ingenieur by IWC (it is a common misconception by many that the ‘222’ and the Overseas by Vacheron Constantin were also designed by Genta).

Since I consider myself a bit of a purist, I prefer versions of these watches as they were initially made, or at least how they were meant to be: in stainless steel. The concept behind them was that they would be luxurious yet sporty. The “sporty” part has been, perhaps, a bit exaggerated by these brands in the past, but let’s admit that the models named above were certainly more sporty than most of those brands’ classic lineup.

Anyway, Patek Philippe introduced a new watch to its existing Nautilus collection (another of Genta’s iconic designs), in gold. When I first saw this piece, I shrugged my shoulders and thought to myself that the stainless-steel Nautilus Reference 5711/1A or the vintage 3700/1A are the models that I would prefer to own someday. Period. But after my appointment with Patek Philippe at Basel, during which I got to see and try on the new Nautilus in gold, I wasn’t so sure about that anymore.

Patek Philippe Nautilus Ref. 5711 - Gold - front

The new Nautilus in gold is an amazing-looking watch; even with a pale-skinned wrist like mine, I think I could get away with wearing it. Whereas the stainless steel version — which I’ve tried on often — feels comfortably light (there is still enough weight to ensure you the watch is still there), the gold version has a much larger presence. The weight of the gold doesn’t let you forget what’s on your wrist. Besides the weight aspect, the presence is also there because of the warm color of the gold. Due to the very recognizable finishing on the case and bracelet, this watch will never look tacky or flashy.

Patek Philippe Nautilus Ref. 5711 - Gold - tilted_560

A gold Patek Philippe Nautilus isn’t something new. Actually, the first Nautilus reference (3700/1A) was also produced in gold back in the late 1970s. Later Nautilus models also became available in gold (like the Reference 5980 chronograph), but never the reference 5711/1A. Patek Philippe decided to use rose gold for the case and bracelet and, instead of the blue/greenish dial in the stainless steel version, picked a warm chocolate brown color for the dial. It gives the cheap replica watch a very classy look and makes you forget that a Nautilus should be a stainless steel watch only.

Patek Philippe Nautilus Ref. 5711 - Gold - dialCU

Actually, it made me wonder whether a gold Nautilus 5711/1A is something a purist can get away with. Besides the fact that there actually was an original 1970s 3700/1A in gold, you can debate whether the current 5711/1A isn’t already too far away from the original 3700/1A series for a purist (here is a comparison between the 3700/1A and 5711/1A). The see-through caseback, the seconds hand, and the fact that the case isn’t a monocoque anymore already makes the 5711/1A a decidedly modern interpretation of the original 3700/1A.

Patek Philippe Nautilus Ref. 5711 - Gold - back

The best solution, perhaps, would be to own an original Patek Philippe 3700/1A in stainless steel and get the Nautilus 5711/1A in rose gold as a modern alternative. See how I am looking for excuses to own both? Truth to be told, I am warming up to gold luxury replica watches uk in general, and think the Patek Philippe Nautilus 5711/1A is an excellent example of how a gold “sports” watch can be tasteful. A job well done by Patek Philippe. The Genta adept in me probably will always crave that mint-condition 3700/1A in stainless steel, but a rose-gold 5711/1A on my wrist would make that hunt a bit more bearable.